2HP 3inch Wqd Electrical Sewage Drainage Submersible Pump with Cutter

• Max.Head: 10-30m
• Max.Capacity: 200-300 L/min
• Driving Type: Motor
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: WQD25-7-1.5
• Material: Stainless Steel
• Structure: Single-stage Pump
• Assembly: Electric Water Pump
• Power: Electric
• Start Up: Electric Pump
• Type: Wqd Submersible Water Pump
• Application: Submersible Pump, Sewage Pump
• Industry: Mechanical Pump
• Media: Clean Water
• Performance: Wear Pump
• Theory: Submersible Pump
• Place of Origin: Zhejiang, China (Mainland)
• Model Number: Wqd Series
• Shaft: Carbon Steel/Stainless Steel
• Voltage: 220V/380V
• Brand: Wedo Brand
• Standard or Nonstandard: Standard
• Mechanical: Carbon/Ceramic/Stainless Steel
• Motor Housing: Stainless Steel
• Flow Switch: with or Not Is Both Avaliable
• Speed: 2800r/Min
• Transport Package: Carton/Case
• Specification: CE
• Trademark: WEDO BRAND
• Origin: Taizhou, China
• HS Code: 8413709190
• Production Capacity: 10000PCS/Day
• Package Size: 50.00cm * 50.00cm * 100.00cm
• Package Gross Weight: 50.000kg

Product Description

2hp 3inch WQD Electrical Sewage Drainage Submersible Pump with Cutter

Product Description

WQD series pump with open runner impeller, which is specially designed, has super strong capacity. so , the pump not only won't be blocked because of sucking in solid particle and fiber impurity, but also avoid easily stopping because of sucking inabrasive grain, especially used to sewage irrigation, construction site, coal, mine, metallurgy , dying and textile industry, etc. water pump with float ball is an automatic control type, after water level decines to below submersed surface, float ball will automatically sink, then the pump will stop work, after water level increase, float ball will increase automatically then the pump begins running, this protective function prevents motor damege due to dry running of the pump. it saves and needs no tender, very convenient and reasonable for usage

Application
 
Model V submersible sewage pump series, a branch of single-phase and three phase drainage pumps, will be your ideal drainage hlper, the letter V which substitutes for the letters WQ incicates the distinct design of the filter and the broadness of the high efficient area. it can work safely and efficiently at high flux with the feature of complete heads, the design is designed to a wide tunnel which helps to convey the long fiber liquid or the solid whose diameter is about 15-25mm. the selection of bottom suction structure, stainless steel and special cast iron made the pump has the capabilities with the change of the liquor lever. the protector in the motor can automatically cut off the power when it overheated or over currented, thus guarantee the security and reliability of pump run even in the atocious environment


OPERATING CONDITIONS
The maximum immersion:5m
Maximum fluid temperature up to +40 degree 
Trans mediums PH scope:4-10
Kinematic viscosity of the trans medium:7x10-7-23x10-6m2/s
Density of the trans medium limit:12x1000kg/m3
 
MOTOR AND PUMP
Rewindable motor, full obturated screen motor
Single phase: 220v-240v/50hz 
Equip with start control box or digital auto-control box
Pumps are designed by casing stressed
 
OPTIONS ON REQUEST 
Special mechanical seal 
Other voltages or frequency 


MAIN TECHNICAL PARAMETER  

model	power		Volt.	Flow	Head	Outlet.	package dimension&GW
	HP	KW	V	m3/h	m	inch	L	W	H	KG
WQD10-10-0.75	1	0.75	220/380	10	10	2"	510	140	165	12.5
WQD15-10-1.1	1.5	1.1		15	10	2"	510	140	165	14
WQD25-7-1.5	2	1.5		25	7	3"	510	140	165	14.5
WQD25-10-2.2	3	2.2		25	10	3"	565	140	165	25
WQD25-15-3	4	3		25	15	3"	715	140	165	27
WQD42-11-4	5.5	4	220/380	42	11	4"	620	150	190	28
WQD65-12-5.5	7.5	5.5		65	12	4"	620	150	190	28
WQD70-20-7.5	10	7.5	220/380	70	20	4"	620	150	190	32
WQD8-18-0.75	1	0.75		8	18	1.5"	620	150	190	31

 

Company Profile

Our Advantages

Certifications

FAQ

Q1: Are you a factory or a trading company?
A:We are manufacturer.

Q2:What are your payment terms?
A:30% T/T in advance, balance should be paid after receiving BL copy or LC at sight.

Q3: Can you do OEM?
A: Yes,we can. Any OEM are welcome!

Q4:How about the MOQ?
A: Usually, it is 50-100 PCS for each modelBut sample order is highly welcome.

Q5:How about the delivery time?
A: 15-30 days after receiving customersdeposit.

Q6: How long is your warranty?
A:1 year.

Q7:What can we do in one-year warranty?
A:1.Providing Spare parts; 2.Engineer is available to service.